Series 2 Ti surfaces

Post Reply
dralf1965
Posts: 147
Joined: Sun Mar 16, 2014 2:21 pm

Series 2 Ti surfaces

Post by dralf1965 »

And another one appears. They are still out there chaps
http://www.ebay.co.uk/itm/1978-Alfasud- ... 259194a52c

Greencloverleaf pat
Posts: 300
Joined: Mon Jan 27, 2014 9:43 pm

Re: Series 2 Ti surfaces

Post by Greencloverleaf pat »

That's a bit of a funny sud ti series 2 on the outside ie bumpers spoilers and wheel arches but series one on the inside ie dashboard and seats..
Still worth buying though.
I used to have years ago in that colour a sud tis which had series 3 lights rear spoiler and arches but series 2 inside ie seats and dash.

vecchioalfa
Posts: 433
Joined: Tue Apr 22, 2014 1:09 pm
Location: Nottingham

Re: Series 2 Ti surfaces

Post by vecchioalfa »

Greencloverleaf pat wrote:That's a bit of a funny sud ti series 2 on the outside ie bumpers spoilers and wheel arches but series one on the inside ie dashboard and seats..
Still worth buying though.
I used to have years ago in that colour a sud tis which had series 3 lights rear spoiler and arches but series 2 inside ie seats and dash.
There were quite a few cars like that back in the day, it was at the change over period, there sort of a series 1 1/2 !! I can only think that Alfa must have had a quantity of Series 1 interiors to burn off :) all the cars seem to be on 'V' plates usually in the UK

SteffenJ3316V
Posts: 130
Joined: Thu Jan 30, 2014 1:12 pm
Location: Denmark

Re: Series 2 Ti surfaces

Post by SteffenJ3316V »

They pretty much only exist in rhd. The reason being that they made the facelift on the lhd model first. The same goes with the S3 with the S2 dash. I have never seen a lhd in that combo :)

Greencloverleaf pat
Posts: 300
Joined: Mon Jan 27, 2014 9:43 pm

Re: Series 2 Ti surfaces

Post by Greencloverleaf pat »

The ti I had was a w reg 1.5 ti which had series 3 rear spoiler front , series 3 front lights and rear lights but still had the little boot that hinges upwards.

ed5000
Posts: 23
Joined: Thu Jan 30, 2014 8:59 am
Location: Co Wicklow, Ireland

Re: Series 2 Ti surfaces

Post by ed5000 »

It's a strange one. It wasn't registered until Jan '79 but still has the S1 dash. My Super was manufactured in Dec '77, registered in Aug '78 but has the S2 dash.
1978 Series 2 1.3 Super
2006 GT 1.8TS

User avatar
KevJTD
Posts: 5126
Joined: Thu Sep 26, 2013 8:48 pm
Location: Lincs

Re: Series 2 Ti surfaces

Post by KevJTD »

could well have left the factory with an S2 dash and been changed sometime over the last 35 or so years.
although i'd love to take it on the thought of starting off fresh again isn't to be taken lightly, 2 or 3 years of commiting to getting it back to 100% isn't an appealing prospect.


anyone on here got designs on it?
Giulietta JTD 170
Lancia Delta integrale
Lancia Flavia coupe 1.8 1963
Lancia Dedra turbo
Maserati 3200GT

I'm bad with people things
But I should have tried more

vecchioalfa
Posts: 433
Joined: Tue Apr 22, 2014 1:09 pm
Location: Nottingham

Re: Series 2 Ti surfaces

Post by vecchioalfa »

I can only imagine how bad the 'A' posts / bulkhead etc. will be, mine looked to be in very good shape until digging deeper :roll:
Its clear this car has been standing outside a long time & it suits someone who will be doing his own work and is aware it will take years to complete and get it right, its not a light or medium restoration on this it a full blown bare shell job. I hope it ends up in the right hands and is saved.

I had a series 1 Ti that I sold to Austria a few years ago, it was registered in 1979 and on a 'T' plate and had a series 1 dash, it was an original old thing with history so there was definitely a substantial change over period.
This green Ti to me if restored would be best off loosing the series 2 bumpers and body trims and becoming a complete series 1 Ti..... unless the wiring shows the dash has been changed from a series 2 one

alfachris
Posts: 489
Joined: Mon Jun 16, 2014 5:12 pm
Location: Hinckley, Leicestershire

Re: Series 2 Ti surfaces

Post by alfachris »

Greencloverleaf pat wrote:The ti I had was a w reg 1.5 ti which had series 3 rear spoiler front , series 3 front lights and rear lights but still had the little boot that hinges upwards.
Was it a 1.5 tix?

alfachris
Posts: 489
Joined: Mon Jun 16, 2014 5:12 pm
Location: Hinckley, Leicestershire

Re: Series 2 Ti surfaces

Post by alfachris »

So did someone on here win it?

Greencloverleaf pat
Posts: 300
Joined: Mon Jan 27, 2014 9:43 pm

Re: Series 2 Ti surfaces

Post by Greencloverleaf pat »

It was a tis that I owned.

User avatar
KevJTD
Posts: 5126
Joined: Thu Sep 26, 2013 8:48 pm
Location: Lincs

Re: Series 2 Ti surfaces

Post by KevJTD »

alfachris wrote:So did someone on here win it?
not me! :D
Giulietta JTD 170
Lancia Delta integrale
Lancia Flavia coupe 1.8 1963
Lancia Dedra turbo
Maserati 3200GT

I'm bad with people things
But I should have tried more

dralf1965
Posts: 147
Joined: Sun Mar 16, 2014 2:21 pm

Re: Series 2 Ti surfaces

Post by dralf1965 »

If someone on here did win it, I have a series 2 dashboard and dash binacle/guages. Also two front seats, the outer covers of which may be salvageable (the layer of foam behind the material has disintegrated). Also have rear spoiler:)

User avatar
KevJTD
Posts: 5126
Joined: Thu Sep 26, 2013 8:48 pm
Location: Lincs

Re: Series 2 Ti surfaces

Post by KevJTD »

dralf1965 wrote:If someone on here did win it, I have a series 2 dashboard and dash binacle/guages. Also two front seats, the outer covers of which may be salvageable (the layer of foam behind the material has disintegrated). Also have rear spoiler:)
to add to that, i have available very good doors, wings and a boot amongst other bits......
Giulietta JTD 170
Lancia Delta integrale
Lancia Flavia coupe 1.8 1963
Lancia Dedra turbo
Maserati 3200GT

I'm bad with people things
But I should have tried more

justsuds
Posts: 352
Joined: Mon Jan 27, 2014 8:50 pm
Location: Chorley Lancs

Re: Series 2 Ti surfaces

Post by justsuds »

It was won by a guy in Liverpool, who bought it for parts, so it probably won't survive, - shame.
John.

alfachris
Posts: 489
Joined: Mon Jun 16, 2014 5:12 pm
Location: Hinckley, Leicestershire

Re: Series 2 Ti surfaces

Post by alfachris »

justsuds wrote:It was won by a guy in Liverpool, who bought it for parts, so it probably won't survive, - shame.
John.

Alot of money for just parts

User avatar
KevJTD
Posts: 5126
Joined: Thu Sep 26, 2013 8:48 pm
Location: Lincs

Re: Series 2 Ti surfaces

Post by KevJTD »

a shame if it ends up for parts but was always likely given the extent of corrosion.

agree though, a lot of money for a parts car.
Giulietta JTD 170
Lancia Delta integrale
Lancia Flavia coupe 1.8 1963
Lancia Dedra turbo
Maserati 3200GT

I'm bad with people things
But I should have tried more

vecchioalfa
Posts: 433
Joined: Tue Apr 22, 2014 1:09 pm
Location: Nottingham

Re: Series 2 Ti surfaces

Post by vecchioalfa »

.....Hope he gets in touch... I could do with a log book for the sud I'm importing from Australia :)

Post Reply