Classic Alfa Forums

Afternoon all.

My sud is LHD, running 33 front suspension and outboard brakes etc.

I recently took it to be tracked and wasn't really happy with the result and difficulty of adjustment, removing the steering arms to adjust.

I did a bit of googling and found that some 33s (with power steering I think?) had steering arms with an adjuster in the arm so they can be adjusted on the car.

Can anybody think of a reason why these wouldn't fit? If they will, does anybody have any knocking about in their spares pile they would like to sell?

different sized bushes where they bolt to the rack, make sure to get the correct size
otherwise they'll fit i think.
sure john will have some

I’ve fitted them to both my Sud and 33, they make toe adjustment so much easier.
From memory I think we fitted a sleeve in the bush so the they fit the rack studs properly.

Thanks,

Adam

Here you go

https://www.ebay.it/itm/235609326648?_n ... R7zBjcG4ZA

The powered 33 racks do indeed have adjustable sections and it makes adjustment much easier. the inner end bush has a bigger internal diameter. When I used them on my 33 (sud rack) I just knocked up a couple of simple sleeves to suit the sud rack studs to take the 33 bushings.

All,

I now have a pair.

Yes, the bushes are 12mm holes vs. the 10mm studs / bush holes on the 'sud rack. I'm also making a couple of sleeves. Bend is slightly different, but looks like they will fit OK.

Pictures to follow.