Page 1 of 1
S1 Ti Fabric
Posted: Mon Oct 16, 2017 11:42 am
by 88liam
Good Morning
Tried to contact Kilroy to enquire about the S1 fabric,
does anybody have any for sale, left over or have
contact details for Kilroy or the manufacture of the
copy material.
Liam
Re: S1 Ti Fabric
Posted: Mon Oct 16, 2017 4:07 pm
by Alfa_Japan
A gentleman in Italy has reproduced this fabric as well and sells it, should there be no left overs of Kilroy's excellent reproduction anymore. I will post a link, but first have to find it again, give me some time.
Re: S1 Ti Fabric
Posted: Mon Oct 16, 2017 8:44 pm
by Alfa_Japan
Hi "88liam", I found the Italian manufacturer of the reproduction S1 TI fabric, however you have to contact him because currently I can only find his add for reproduction Sprint QV fabric. This gentleman reproduces S1 TI Fabric, S3 TI QV fabric and Sprint QV fabric.
https://www.kijiji.it/annunci/ricambi-a ... /116820364
Should you have any use for the link it's good to be able to help someone, cheers.
Re: S1 Ti Fabric
Posted: Mon Oct 16, 2017 8:49 pm
by Alfa_Japan
Here's the link to the S3 TI QV remanufactured fabric by the same gentleman, Currently I can't find an add for his S1 TI fabric, but he has it.
https://www.kijiji.it/annunci/ricambi-a ... /113129905
Re: S1 Ti Fabric
Posted: Mon Oct 16, 2017 10:25 pm
by 88liam
Thank you, i have sent a message, hopefully he will come back to me.
Liam
Re: S1 Ti Fabric
Posted: Tue Oct 17, 2017 3:19 pm
by Alfa_Japan
This gentleman also speaks English, so I suppose you will receive a reply, good luck on the hunt for this fabric
Re: S1 Ti Fabric
Posted: Tue Oct 17, 2017 5:59 pm
by 88liam
Hi,
Been in contact, only sprint material available, others available from December,
Liam
Re: S1 Ti Fabric
Posted: Tue Oct 17, 2017 9:39 pm
by Alfa_Japan
Waiting 2 months is better then not being available. Hope this contact was of some help to you.
Re: S1 Ti Fabric
Posted: Wed Oct 25, 2017 8:25 pm
by 88liam
Alfa_Japan wrote:Waiting 2 months is better then not being available. Hope this contact was of some help to you.
Hi,
I Have placed an order for Alfasud S3 ti material with Antuan, he received a few orders
over the last few days which enabled a new batch to be produced.
The S1 Alfasud material, Ian (Kilroy) as kindly sold me enough material to assist
my project.
Liam
Re: S1 Ti Fabric
Posted: Wed Oct 25, 2017 8:49 pm
by Alfa_Japan
Sounds great. Good luck on these 2 upholstery refurbishments.