Page 1 of 1

Zender kit strips

Posted: Fri Nov 04, 2016 2:26 am
by Cathal
Hi,

As from the picture attached, it's the Zender kit on my Sprint. I was wondering if anyone had or knew where I might be able to get the strips that cover over the attaching screws holes.
I know it's not an easy one, but I would be very thankful if anyone could help me with my plight. :?:

Re: Zender kit strips

Posted: Fri Nov 04, 2016 8:56 am
by Johnboy
Hi chap

Try John at just suds .he's on here .but you may have to get creative and make your own ;)

Re: Zender kit strips

Posted: Fri Nov 04, 2016 9:36 am
by Simonsud
https://www.ebay.co.uk/itm/221861077580
This should do you can get it in black as well

Re: Zender kit strips

Posted: Fri Nov 04, 2016 9:48 am
by Johnboy
That'll work

Re: Zender kit strips

Posted: Fri Nov 04, 2016 1:29 pm
by Cathal
Hi guys,

Thanks for replying. I think I will give John at Justsuds a call first. I'd like to try and go the original route first before I look for an alternative way.

Cathal. :roll:

Re: Zender kit strips

Posted: Fri Nov 04, 2016 2:32 pm
by Sprint88qv
Hi,

Yes if you mean the colour coded strips that fit in the channels along the zender pieces then I feel your pain.

I've been slowly collecting some of those strips for a while for my zender kitted sprint - 9 years and still short of a couple.

They do turn up from time time but rare as hens teeth normally.

So if you get anywhere with John, let me know and I'll also try (after you've got what you need of course).

Ed.

Re: Zender kit strips

Posted: Fri Nov 04, 2016 4:49 pm
by Cathal
Hi

Yeah I believe they are a rare commodity ok. But I will exhaust every avenue first before I get out the hammer and chisel and try and make my own ones.
All good things come to he who waites .......??? :lol:

Re: Zender kit strips

Posted: Thu Jun 07, 2018 7:29 pm
by petteri
This might be late but I managed to find some sort of plastic electric cable channel, which fits nicely! If this topic isn't yet obsolete, I can check the channel type.

Re: Zender kit strips

Posted: Thu Jun 28, 2018 3:33 am
by Sprint67
Hi petteri,

Thanks for reply, still searching for Zender kit strips, no joy as yet.
What you posted looks good, if you can find out anything more on this would appreciate it, thanks. ;)

Cathal.

Re: Zender kit strips

Posted: Tue Jul 03, 2018 7:58 pm
by petteri
CableChannel.JPG
The cable channel is made by Famatel. It is the inner part which will work. This part does have a some sort of tape which need to removed with solvent. Maybe there is also available version without this adhessive tape?
ZenderClip.JPG
I also got Zender clipses 3D printed (alongside door handle ), since some of the clipses were in quite a bad shape.

Re: Zender kit strips

Posted: Wed Aug 15, 2018 11:55 am
by Sprint67
Hi petteri,

Thanks again for replying to me. Can you if possible let me know where these strips can be purchased from.
Is there a website available to further view these strips or are they just purchased over the counter some where :?:

Cathal.