Page 1 of 1

ANYONE HAVE ANY OF THESE?

Posted: Fri Jan 22, 2016 12:08 pm
by PETROLHEAD
Hi all

does anyone have any of these styled speedlines, mostly found on 155's but occasionally on others.
DSC_2782.JPG

first of all, if you have any, i would like to get a measurement off them please, which is as pictured below, the diameter of the inner circle?

dimension required.jpg



I think they came in 5 stud 16" and 4 stud 15", but coud be wrong.

If they measure up to something like i need i might be interested in a set to buy, so don't be shy, drag them out! :D

Re: ANYONE HAVE ANY OF THESE?

Posted: Fri Jan 22, 2016 4:20 pm
by justsuds
15" is approx 275 - 280mm, and 16" is approx 300mm, - the 16" wheel is one you gave me Shrew over 12 months ago that someone was going to collect from me, - it's still here, if you can remember whos' it is give him a shout, - if not, there is a 16" available if you can find another three ! I have 2 15" off a 75 if these are of interest.
John.

Re: ANYONE HAVE ANY OF THESE?

Posted: Fri Jan 22, 2016 5:14 pm
by PETROLHEAD
Thanks John.

it would be 15" 4 stud that i'm after firstly.

could i trouble you to measure the outer diameter of that circle too John please? :P

Re: ANYONE HAVE ANY OF THESE?

Posted: Fri Jan 22, 2016 6:23 pm
by alfachris
My mate has got some but they are in Windsor so a few weeks before we're at the barn

Re: ANYONE HAVE ANY OF THESE?

Posted: Sat Jan 23, 2016 12:20 am
by Fiatchris
I sold some to a guy in Arnold Sainsburys car park about 10 years ago..... that isn't very helpful is it!!?? :D :D

Chris

Re: ANYONE HAVE ANY OF THESE?

Posted: Sat Jan 23, 2016 1:44 am
by PETROLHEAD
:lol: :lol: :lol:



No,


It isnt....

:D

Re: ANYONE HAVE ANY OF THESE?

Posted: Sat Jan 23, 2016 10:05 am
by justsuds
Outer diameter is 320mm Shrew.
John.

Re: ANYONE HAVE ANY OF THESE?

Posted: Sun Jan 24, 2016 3:53 pm
by PETROLHEAD
The 15's should work just fine then i reckon thanks John.

Thanks for the measurements mate, onto phase 2! :D

Re: ANYONE HAVE ANY OF THESE?

Posted: Mon Jan 25, 2016 1:12 am
by adsblacksud
Hello Shrew,
I have four (I think) of these originally from a 155 Q4
They are 15" 4 stud and something like +49.5 ET so don't fit on a sud without spacers.
The fake plastic bolts have been removed and they were wet painted and definitely need a refurb.
I'll send you some photos if you are interested

Thanks

Adam

Re: ANYONE HAVE ANY OF THESE?

Posted: Mon Jan 25, 2016 12:06 pm
by PETROLHEAD
They sound terrible! :o

Of course I'm interested! :lol: :lol: :lol:

Re: ANYONE HAVE ANY OF THESE?

Posted: Mon Jan 25, 2016 10:04 pm
by adsblacksud
Okey dokes, it'll probably be next weekend before I can get to them.

Thanks

Adam

Re: ANYONE HAVE ANY OF THESE?

Posted: Mon Jan 25, 2016 10:44 pm
by Alfasixnut
Not a lot of help but I had a set of those on my 16V Sprint - which I sold about 18 months ago. But I believe it got broken for spares about 6 months later, down on the South Coast???
DSCF6277.JPG

Re: ANYONE HAVE ANY OF THESE?

Posted: Tue Jan 26, 2016 9:34 pm
by Alfasixnut
Re the 16v Sprint - Peter Webb bought the car as the restoration garage declared the bodyshell beyond economic repair. It has been broken for spares and the Speedline wheels have been sold to America.....sorry Shrew.(Peter says Hi)

Re: ANYONE HAVE ANY OF THESE?

Posted: Wed Jan 27, 2016 8:48 am
by PETROLHEAD
Thats a shame, all round! :(

Thanks Phll 8-)