My 916 Spider
Re: My 916 Spider
Well that is a pain you could do without.
Hope something can be sorted out.
Hope something can be sorted out.
- LooLooSud33Spider
- Posts: 1759
- Joined: Mon Dec 05, 2016 11:14 pm
- Location: Staffordshire
Re: My 916 Spider
Indeed it is Keith. I’ve decided to refit the Monroes for the time being (after giving them a quick paint job). I wasn’t changing them because they were knackered but more that I had the konis. I’ve also still got to put the drivers door back together.
Alfasud Ti 1984
Alfa Spider 2.0 Ts 916
Alfa Spider 20v Turbo
Alfa Spider 2.0 Ts 916
Alfa Spider 20v Turbo
- LooLooSud33Spider
- Posts: 1759
- Joined: Mon Dec 05, 2016 11:14 pm
- Location: Staffordshire
Re: My 916 Spider
Spider Front end all finished at last. It Should last a few years before i have to do anything major on the suspension now.
Still got a few bits to do at the rear and put the drivers door back together then I’ll tax it next month ready for summer
The wheels do need a refurb but I’m skint at the moment so that may be next winters hibernation project Still got a few bits to do at the rear and put the drivers door back together then I’ll tax it next month ready for summer
Alfasud Ti 1984
Alfa Spider 2.0 Ts 916
Alfa Spider 20v Turbo
Alfa Spider 2.0 Ts 916
Alfa Spider 20v Turbo
Re: My 916 Spider
Lou,
should last more than a few years!
I presume you have to check the tracking after a front end rebuild.
Seems there are DIY laser tracking kits available for reasonable money......or do you go to a tyre place?
should last more than a few years!
I presume you have to check the tracking after a front end rebuild.
Seems there are DIY laser tracking kits available for reasonable money......or do you go to a tyre place?
- LooLooSud33Spider
- Posts: 1759
- Joined: Mon Dec 05, 2016 11:14 pm
- Location: Staffordshire
Re: My 916 Spider
The Spider passed its MOT passed with flying colours again today. ![👍](//twemoji.maxcdn.com/2/svg/1f44d.svg)
Alfasud Ti 1984
Alfa Spider 2.0 Ts 916
Alfa Spider 20v Turbo
Alfa Spider 2.0 Ts 916
Alfa Spider 20v Turbo
- LooLooSud33Spider
- Posts: 1759
- Joined: Mon Dec 05, 2016 11:14 pm
- Location: Staffordshire
Re: My 916 Spider
Thanks Ade. I’m Well chuffed. Trevor the tester even complimented me on the general condition of the car.
Alfasud Ti 1984
Alfa Spider 2.0 Ts 916
Alfa Spider 20v Turbo
Alfa Spider 2.0 Ts 916
Alfa Spider 20v Turbo
Re: My 916 Spider
Roll on the rest of the summer eh Lou. Well done, a great result.
- LooLooSud33Spider
- Posts: 1759
- Joined: Mon Dec 05, 2016 11:14 pm
- Location: Staffordshire
Re: My 916 Spider
Yeah but like everyone else I’m still waiting for the summer to come back.
Alfasud Ti 1984
Alfa Spider 2.0 Ts 916
Alfa Spider 20v Turbo
Alfa Spider 2.0 Ts 916
Alfa Spider 20v Turbo
- LooLooSud33Spider
- Posts: 1759
- Joined: Mon Dec 05, 2016 11:14 pm
- Location: Staffordshire
Re: My 916 Spider
2023/4 Winter hibernation work on the spider. New radiator along with a freshly powder coated fan shroud. And I’ve managed to get all the old sclonge out of the header tank.
I also took the opportunity to remove and inspect the fuel pump / sender unit out of the tank to check its general condition. On The early cars the fuel pump sits in a big rubber holder. Over time they can break down and fall apart leading to potential fuel pressure issues. They change the design on The later cars and they much more robust. But it was worth checking
Next session will be on the back end suspension arms etc I’ve already fitted new shocks, springs and bump stops and cones (the bump stop cones have a habit of rotting away). I’m also going to take my front konis off as I love the way it looks on the 18” jetfins but they won’t fit with the lowered spring pans of the Konis. That said I’ve also got a set of 17” teledials but they need new tyres.
But before I can do that I have to redecorate the dining room. It’s all Fun fun fun this Christmas![🎄](//twemoji.maxcdn.com/2/svg/1f384.svg)
I also took the opportunity to remove and inspect the fuel pump / sender unit out of the tank to check its general condition. On The early cars the fuel pump sits in a big rubber holder. Over time they can break down and fall apart leading to potential fuel pressure issues. They change the design on The later cars and they much more robust. But it was worth checking
Next session will be on the back end suspension arms etc I’ve already fitted new shocks, springs and bump stops and cones (the bump stop cones have a habit of rotting away). I’m also going to take my front konis off as I love the way it looks on the 18” jetfins but they won’t fit with the lowered spring pans of the Konis. That said I’ve also got a set of 17” teledials but they need new tyres.
But before I can do that I have to redecorate the dining room. It’s all Fun fun fun this Christmas
Alfasud Ti 1984
Alfa Spider 2.0 Ts 916
Alfa Spider 20v Turbo
Alfa Spider 2.0 Ts 916
Alfa Spider 20v Turbo
Re: My 916 Spider
Lou, looks like an up and coming minter!
Are there any regular rust traps on the Spiders?
I need to know for when I buy one!
They still seem to go for bargain prices
Are there any regular rust traps on the Spiders?
I need to know for when I buy one!
They still seem to go for bargain prices
- LooLooSud33Spider
- Posts: 1759
- Joined: Mon Dec 05, 2016 11:14 pm
- Location: Staffordshire
Re: My 916 Spider
Thanks Dave. Tbh the 916 series cars seem to be ageing very well. That said the biggest areas are rear ends of the sills and rear arches obviously there isn’t much metal work at the front but inner wings around the strut top Mount are worth looking at aswell as the floor to sill seam. Doors don’t seem to be a problem. But also Check the boot floor rear light seals can leak leading to a damp boot. Lou
Alfasud Ti 1984
Alfa Spider 2.0 Ts 916
Alfa Spider 20v Turbo
Alfa Spider 2.0 Ts 916
Alfa Spider 20v Turbo
- LooLooSud33Spider
- Posts: 1759
- Joined: Mon Dec 05, 2016 11:14 pm
- Location: Staffordshire
Re: My 916 Spider
Oh yeah and hoods can become tatty and rough. At the moment mine isn’t too bad but there a co in Stockport that does decent quality ones for £1180. Btw I’d also go for Manual roof instead of the fancy hydraulic ones. They add significant weight and It’s just another level of “Go Wrongery” that i didnt fancy getting involved with
Alfasud Ti 1984
Alfa Spider 2.0 Ts 916
Alfa Spider 20v Turbo
Alfa Spider 2.0 Ts 916
Alfa Spider 20v Turbo