alfa 155 white V6 skinny
alfa 155 white V6 skinny
I got the V6 from where it has been stored for the last year.............to start it was very green lol
Started clean the rust on the floors only made two more holes but the boot floor/inner wings are are not good so will be removing the rear wings over the weekend and put photos up.
Was hoping to have it mot'd on Monday but that's not going to happen now
The rear subframe needs new bushes aswell so will take a bit long
Started clean the rust on the floors only made two more holes but the boot floor/inner wings are are not good so will be removing the rear wings over the weekend and put photos up.
Was hoping to have it mot'd on Monday but that's not going to happen now
The rear subframe needs new bushes aswell so will take a bit long
Re: alfa 155 white V6 skinny
This is what it look like 3 years ago with a seized engine after oil cooler pipe went on the lsst owner. I fitted another engine and used it for 2 years
The rear wings are rusty but have good set of used ones
The bumpers and boot have always need to be painted so will have the bits repainted
The rear wings are rusty but have good set of used ones
The bumpers and boot have always need to be painted so will have the bits repainted
Re: alfa 155 white V6 skinny
Looks good in white. I always liked my 155's they were quick cars. The V6 wasn't bad on fuel either.
Re: alfa 155 white V6 skinny
Started to do the rear subframe refurb had a subframe that I had shot blasted a few months ago.
Already have a set of trailing arm bearing kits. Also painted 2 speedline alloys gloss black
Ordered a set of ploy bushes for subframe off ebay
Already have a set of trailing arm bearing kits. Also painted 2 speedline alloys gloss black
Ordered a set of ploy bushes for subframe off ebay
Re: alfa 155 white V6 skinny
i hope one day to get another 145, or maybe a 155.
you must be getting lonely in here with the section to yourself
you must be getting lonely in here with the section to yourself
Giulietta JTD 170
Lancia Delta integrale
Lancia Flavia coupe 1.8 1963
Lancia Dedra turbo
Renault Clio 197 RS
I'm bad with people things
But I should have tried more
Lancia Delta integrale
Lancia Flavia coupe 1.8 1963
Lancia Dedra turbo
Renault Clio 197 RS
I'm bad with people things
But I should have tried more
Re: alfa 155 white V6 skinny
I'm ok talking to myself lolKevJTD wrote:i hope one day to get another 145, or maybe a 155.
you must be getting lonely in here with the section to yourself
I'm trying to get v6 back on the road before moving. Got a friend who wants the V6 but finding it had to sell it.
Re: alfa 155 white V6 skinny
Ditto Kev......I'd like another 155. Wonder if I could persuade the 'boss' to have one for the school run....
I like the black sport pack, or the metallic purple (magenta?).
I like the black sport pack, or the metallic purple (magenta?).
Re: alfa 155 white V6 skinny
Veesix75 wrote:Ditto Kev......I'd like another 155. Wonder if I could persuade the 'boss' to have one for the school run....
I like the black sport pack, or the metallic purple (magenta?).
bit like this silverstone tim....go on, get it. save me from bidding
http://www.ebay.co.uk/itm/161521211297? ... EBIDX%3AIT
Giulietta JTD 170
Lancia Delta integrale
Lancia Flavia coupe 1.8 1963
Lancia Dedra turbo
Renault Clio 197 RS
I'm bad with people things
But I should have tried more
Lancia Delta integrale
Lancia Flavia coupe 1.8 1963
Lancia Dedra turbo
Renault Clio 197 RS
I'm bad with people things
But I should have tried more
Re: alfa 155 white V6 skinny
Prunga is the met purple I had a rusty 2.0 16v for a few years only scrapped it at the start of 2013
Re: alfa 155 white V6 skinny
I'm in here with my 145 but the only problem I have with it at the moment is the horn wont work.KevJTD wrote:i hope one day to get another 145, or maybe a 155.
you must be getting lonely in here with the section to yourself
Re: alfa 155 white V6 skinny
Painted 2 speedline wheels and finished subframe
22mm anti roll bar needs de rusting and painting
22mm anti roll bar needs de rusting and painting
- PETROLHEAD
- Posts: 3046
- Joined: Thu Sep 26, 2013 7:51 pm
- Location: Nottingham
Re: alfa 155 white V6 skinny
Looking very nice Chris
SHREW
I AM the Law!
Alfasud 1.7-16v, Charade Turbo SR, & The Dirty Diesels - GT Cloverleaf, 159 Ti Sportwagon, Saab 9-3 Sportwagon
I AM the Law!
Alfasud 1.7-16v, Charade Turbo SR, & The Dirty Diesels - GT Cloverleaf, 159 Ti Sportwagon, Saab 9-3 Sportwagon
Re: alfa 155 white V6 skinny
Ouch !!
Good luck Chris.
Good luck Chris.
Re: alfa 155 white V6 skinny
On the plus side I've got some bits that I had cut from a shell a few years agoKegsti66 wrote:Ouch !!
Good luck Chris.
Also have a pair of mint skinny rear quarters
Re: alfa 155 white V6 skinny
lol, so much of that pic made me chuckle.
how did you get away with pressing those in your kitchen for starters!!
hope that battery had no power in it either, nice big chunk of metal across the poles...
the presses though are very handy, aren't they
how did you get away with pressing those in your kitchen for starters!!
hope that battery had no power in it either, nice big chunk of metal across the poles...
the presses though are very handy, aren't they
Giulietta JTD 170
Lancia Delta integrale
Lancia Flavia coupe 1.8 1963
Lancia Dedra turbo
Renault Clio 197 RS
I'm bad with people things
But I should have tried more
Lancia Delta integrale
Lancia Flavia coupe 1.8 1963
Lancia Dedra turbo
Renault Clio 197 RS
I'm bad with people things
But I should have tried more
Re: alfa 155 white V6 skinny
KevJTD wrote:lol, so much of that pic made me chuckle.
how did you get away with pressing those in your kitchen for starters!!
hope that battery had no power in it either, nice big chunk of metal across the poles...
the presses though are very handy, aren't they
Pmsl....she was happy but things aren't good between me and her..........the battery was fully charged but was careful with it lol
I've got to fit bushes in my friends subframe on his 155 that I welding and refurbing bits no a local garage wanted £40 +vat to fit them in each subframe so it was cheaper to buy the press
Re: alfa 155 white V6 skinny
women, they just don't understand
well done on a great purchase with the press. mine sits in the corner of the shed mostly but when you need it it's worth it's weight in gold
well done on a great purchase with the press. mine sits in the corner of the shed mostly but when you need it it's worth it's weight in gold
Giulietta JTD 170
Lancia Delta integrale
Lancia Flavia coupe 1.8 1963
Lancia Dedra turbo
Renault Clio 197 RS
I'm bad with people things
But I should have tried more
Lancia Delta integrale
Lancia Flavia coupe 1.8 1963
Lancia Dedra turbo
Renault Clio 197 RS
I'm bad with people things
But I should have tried more
Re: alfa 155 white V6 skinny
That press looks handy, might put one of those on my impending birthday list.
Re: alfa 155 white V6 skinny
Yep very handy I've been after one for a long time but have always had one I could use when I lived in west sussex. Ebay £75 inc next day delivery so no brainerVeesix75 wrote:That press looks handy, might put one of those on my impending birthday list.
Re: alfa 155 white V6 skinny
Got a pair of rear wheel bearings/hubs and had the compomotive mo6 17" alloys refurb'd in satin grey my mate