Re: 33 sills
Posted: Thu Sep 23, 2021 7:52 pm
Its going to be a very strong car.
Classic Alfa Forums
http://www.classicalfaforum.co.uk/forum/
33 sills
http://www.classicalfaforum.co.uk/forum/viewtopic.php?f=3&t=2735
Page 3 of 4
Re: 33 sills
Posted: Tue Nov 02, 2021 5:11 pm
Still at it
Re: 33 sills
Posted: Tue Nov 02, 2021 5:14 pm
Deja vu
Re: 33 sills
Posted: Wed Nov 03, 2021 3:28 pm
Some more done
Re: 33 sills
Posted: Sat Nov 06, 2021 11:54 pm
Sills on
Re: 33 sills
Posted: Mon Nov 08, 2021 4:08 pm
Fixing the floor to the sill
Re: 33 sills
Posted: Mon Nov 08, 2021 4:14 pm
2
Re: 33 sills
Posted: Tue Nov 09, 2021 9:47 am
That car will be good for another 20 years!
Hope the doors fit back ok.
Your diag braces should have kept the openings rigid
Hope the doors fit back ok.
Your diag braces should have kept the openings rigid
Re: 33 sills
Posted: Mon Nov 22, 2021 8:11 pm
Floors done this side
Re: 33 sills
Posted: Mon Nov 22, 2021 8:14 pm
Re: 33 sills
Posted: Mon Nov 22, 2021 8:42 pm
I never had any doubt Craig
Re: 33 sills
Posted: Sat Dec 18, 2021 8:22 pm
The 33 passed its test today. I've treated myself to some road tax for Christmas.
Re: 33 sills
Posted: Sun Dec 19, 2021 2:47 pm
Well done Craig,
A good lockdown job started last year.
What year/engine is it?
Only ever seen close ups of welds!
A good lockdown job started last year.
What year/engine is it?
Only ever seen close ups of welds!
Re: 33 sills
Posted: Sun Dec 19, 2021 3:19 pm
It's a alfa 33 veloce cloverleaf 1.7
Re: 33 sills
Posted: Mon Dec 20, 2021 11:17 pm
Spot on. Well done.
I loved my S2, it was just like yours with the early Zender kit . 1.7 with the five spoke alloys and lowering springs.
I loved my S2, it was just like yours with the early Zender kit . 1.7 with the five spoke alloys and lowering springs.
Re: 33 sills
Posted: Mon Dec 20, 2021 11:50 pm
Re: 33 sills
Posted: Mon Dec 27, 2021 8:10 pm
Like your car, filler cap area had rotted out , so when I replaced the sills, wheel arches, tailgate and back panel I grafted in the filler flap and box from an Alfasud Sprint that was scraped. I also used the plastic filler pipe to connect it to the fuel tank.
Re: 33 sills
Posted: Tue Dec 28, 2021 5:17 pm
Some job - fantastic. 
Can I scrounge a big favour. Would you be able to take a picture of the fusebox for me to compare against. Looking mainly at relay numbers to compare against.
Can I scrounge a big favour. Would you be able to take a picture of the fusebox for me to compare against. Looking mainly at relay numbers to compare against.
Re: 33 sills
Posted: Tue Dec 28, 2021 9:58 pm
I've got a repair panel to go in . I've also been looking at a quarter panel . I do like your idea though!Kegsti66 wrote: ↑Mon Dec 27, 2021 8:10 pmLike your car, filler cap area had rotted out , so when I replaced the sills, wheel arches, tailgate and back panel I grafted in the filler flap and box from an Alfasud Sprint that was scraped. I also used the plastic filler pipe to connect it to the fuel tank.
Re: 33 sills
Posted: Tue Dec 28, 2021 11:37 pm
I can see the repair panel from My Alfa Group 120.5521
Not an easy job though ??
Not an easy job though ??
Re: 33 sills
Posted: Wed Dec 29, 2021 2:39 pm
Re: 33 sills
Posted: Wed Dec 29, 2021 2:44 pm
Re: 33 sills
Posted: Wed Dec 29, 2021 9:34 pm
You sir, are a legend. Thank you. Are you able to say if that one on the right hand side of your pic is for the rear fog lights? On my sprint that is the one that does the interior light dimmer. The one that is blank on your pic is the mystery one for me. But I think you have confirmed for me the relay that is needed and what it does.
Really appreciate your help. Mine is below.
Re: 33 sills
Posted: Sun Jan 02, 2022 10:55 am
There is a paint matching technique where they photograph and match your existing colour.
Colourtone use it near me.
Colourtone use it near me.
Re: 33 sills
Posted: Sat Apr 30, 2022 5:18 pm
The filler cap was picked up on the mot as an advisory so thought I better sort it. Still some work to do but not bad for a days work.
Re: 33 sills
Posted: Sat Apr 30, 2022 11:14 pm
Neatly done, nice work indeed 
Re: 33 sills
Posted: Sun May 01, 2022 7:30 pm
It's not turned out to bad
Re: 33 sills
Posted: Mon May 02, 2022 7:22 pm
Nice one. Looking good. 
Re: 33 sills
Posted: Sat Apr 13, 2024 8:01 pm
I've not been able to do much for a while but the anoying sound of the exhaust banging away prompted me to get on with this job.
Re: 33 sills
Posted: Sun Apr 14, 2024 5:00 pm
Have you got the replacement valance?!