I'm going to be a massive pest now....Sorry :D
I'm going to be a massive pest now....Sorry :D
Finally after years of half hearty searching for a workshop I've finally moved the 33 In. So I'll be on here pestering you guys and extracting your knowledge. First thing will be a massive strip down. Of the 33 ; )
Might do a rebuild thread/blog
Leigh
Might do a rebuild thread/blog
Leigh
Re: I'm going to be a massive pest now....Sorry :D
always nice to get some under cover space
Giulietta JTD 170
Lancia Delta integrale
Lancia Flavia coupe 1.8 1963
Lancia Dedra turbo
Renault Clio 197 RS
I'm bad with people things
But I should have tried more
Lancia Delta integrale
Lancia Flavia coupe 1.8 1963
Lancia Dedra turbo
Renault Clio 197 RS
I'm bad with people things
But I should have tried more
-
- Posts: 205
- Joined: Thu Apr 16, 2015 6:30 am
Re: I'm going to be a massive pest now....Sorry :D
......lots of room for a proper 2 post lift there mate
Re: I'm going to be a massive pest now....Sorry :D
I am sure you will fill that up, nice one.
Looking forward to the build, you won't be a pest.
Looking forward to the build, you won't be a pest.
Re: I'm going to be a massive pest now....Sorry :D
Looking forward to seeing the build thread.
Itching to do another myself so I am sure it will inspire me.......
Itching to do another myself so I am sure it will inspire me.......
Alfa Romeo 33 (907)
Alfa Romeo Giulietta (940)
Alfa Romeo Giulietta (940)
Re: I'm going to be a massive pest now....Sorry :D
So finally I have taken the engine out. Clutch and bearing are knackered so will be looking to replace those.
Can anything be done to flywheel? Lightened etc. And any optional clutches?
Can anything be done to flywheel? Lightened etc. And any optional clutches?
-
- Posts: 84
- Joined: Mon Mar 16, 2020 8:08 am
Re: I'm going to be a massive pest now....Sorry :D
That all looks very familiar. My sprint is similarly dismantled although that’s to treat rust in the engine bay. Yuk
You must be aware of goodies like these if you’ve a racing 33.
http://www.ahmotorsports.co.uk/product/ ... te-clutch/
You must be aware of goodies like these if you’ve a racing 33.
http://www.ahmotorsports.co.uk/product/ ... te-clutch/
Alfasud sprint 1.7
Mazda MX5 NA
Mazda MX5 NA
Re: I'm going to be a massive pest now....Sorry :D
Oh yeah I've made a big shopping list on thereAndrew Fitton wrote: ↑Sun May 03, 2020 4:26 pmThat all looks very familiar. My sprint is similarly dismantled although that’s to treat rust in the engine bay. Yuk
You must be aware of goodies like these if you’ve a racing 33.
http://www.ahmotorsports.co.uk/product/ ... te-clutch/
Re: I'm going to be a massive pest now....Sorry :D
Hi chap
Glad to see your sorting your 33. Shrew aka the boss on here was doing exchange flywheels that had been lightened. Clutches. Theirs a few upgrades. But I'll wait till the race boys and girls chime in . Your getting the heads ported as well so I read on FB .nice
Good luck with the build
Glad to see your sorting your 33. Shrew aka the boss on here was doing exchange flywheels that had been lightened. Clutches. Theirs a few upgrades. But I'll wait till the race boys and girls chime in . Your getting the heads ported as well so I read on FB .nice
Good luck with the build
Powered by the dark side
Gt jtdm blackline
S2 33 cl veloce 16v sleeping
Freestyle superjet jetski
Gt jtdm blackline
S2 33 cl veloce 16v sleeping
Freestyle superjet jetski
Re: I'm going to be a massive pest now....Sorry :D
Flywheels can be lightened, I’m not an expert in doing it, what spec is the engine going to be, high revs etc ? There may be a trade between too light and too heavy .
Mine has a standard flywheel lightened, and a paddle clutch, I think helix. The clutch is either on or off, not much in between. It came with it done so I don’t know exact specs.
Mine has a standard flywheel lightened, and a paddle clutch, I think helix. The clutch is either on or off, not much in between. It came with it done so I don’t know exact specs.
- LooLooSud33Spider
- Posts: 1757
- Joined: Mon Dec 05, 2016 11:14 pm
- Location: Staffordshire
Re: I'm going to be a massive pest now....Sorry :D
We’re also running a Helix paddle clutch. As Tim said they are a bit all or nothing and Would be horrendous in traffic (It’s bad enough just pootling round the paddock) were also running a very light flywheel that I had made.
Alfasud Ti 1984
Alfa Spider 2.0 Ts 916
Alfa Spider 20v Turbo
Alfa Spider 2.0 Ts 916
Alfa Spider 20v Turbo
Re: I'm going to be a massive pest now....Sorry :D
Yeah might leave it to the engine builder tbh, I'm thinking about putting a set of carbs on it and getting rid of the injection. Gives the engine bay a fresh clean look too.Veesix75 wrote: ↑Mon May 04, 2020 4:55 pmFlywheels can be lightened, I’m not an expert in doing it, what spec is the engine going to be, high revs etc ? There may be a trade between too light and too heavy .
Mine has a standard flywheel lightened, and a paddle clutch, I think helix. The clutch is either on or off, not much in between. It came with it done so I don’t know exact specs.
Re: I'm going to be a massive pest now....Sorry :D
I’ve used standard clutches on closer to prod spec racers with no issues. My 1700 8v was about 130bhp and always ran a std clutch.
- LooLooSud33Spider
- Posts: 1757
- Joined: Mon Dec 05, 2016 11:14 pm
- Location: Staffordshire
Re: I'm going to be a massive pest now....Sorry :D
Like Tim. I’ve used std clutches on 1800 8v 140hp without issue. Currently running a Helix paddle But it’s now 180hp 16v But even that had a std clutch for a while.
Alfasud Ti 1984
Alfa Spider 2.0 Ts 916
Alfa Spider 20v Turbo
Alfa Spider 2.0 Ts 916
Alfa Spider 20v Turbo
Re: I'm going to be a massive pest now....Sorry :D
Brill thanks guys. Makes things easier.