Page 1 of 1
Gear selector oil seal size
Posted: Sun Feb 23, 2014 3:23 pm
by dave.armstrong
Does anybody know the exact size of the gearbox selector oil seal on a Sud gearbox?
Without taking it out it looks like about OD 25mm, ID 15mm (dont know depth).
Re: Gear selector oil seal size
Posted: Sun Feb 23, 2014 4:08 pm
by dave.armstrong
The part number is 60612499
Corteco 12015773B
16mm x 24mm x 7mm
http://www.mister-auto.co.uk/en/basket/
£6.16
Re: Gear selector oil seal size
Posted: Sun Feb 23, 2014 6:59 pm
by dave.armstrong
Whilst I am at it - the differential 'O' rings are part number 60502674
73mm x 2mm
Re: Gear selector oil seal size
Posted: Mon Feb 24, 2014 11:20 pm
by Spacenut
Hi Dave - the seals that are the worst offenders seem to be the ones that seal around the halfshafts. You need special tools to extract the pressed-on bushes to get to them, and I understood that they were no longer produced, but may be wrong (wouldn't be the first time). Do you have a part number/source for these items? If you are getting oil on your brake discs this is almost certainly where it is coming from.
Good luck sorting the rebuild!
Lauren
Re: Gear selector oil seal size
Posted: Tue Feb 25, 2014 9:13 pm
by justsuds
Hi Dave, - fairly sure I've got all gearbox oil seals in stock, all Corteco parts.
John.
Re: Gear selector oil seal size
Posted: Wed Feb 26, 2014 3:59 pm
by dave.armstrong
I wished I d asked on Saturday !
