Another photo request

[StescoG66]

Sorry to be a pest folks, but would somebody be able to post up a pic of where/how the control cables fit in the arms on the matrix. I am struggling to fit them back on. Any hints.

[StescoG66]

Some pics to show what I mean

[KevJTD]

You're missing the metal clips that hold the outer cables to the square sections of plastic on the side of the heater box. The inner moving section just loops through the lever arms (onto that staggered section if you see what I mean) then the outer cable is clamped to the box.
I'll try and find a picture from some I've done, haven't got any here to take a pic of now I'm afraid.

[Gary Orchard]

Also the speedo cable id not located properly - the arrow on the black plastic bit should face the front of the car - yours is pointing sideways

[StescoG66]

Thank you gents. I thought as much....... gawd knows where the clip has gone! A pic would be a great help, thank you.

Will sort the speedo cable bit too - silly me!

Managed to snap the choke cable too............

[junior]

Also the speedo cable id not located properly - the arrow on the black plastic bit should face the front of the car - yours is pointing sideways

Just out of interest, why does it need to be that way. Ta.

[Gary Orchard]

It effects the angle that the cable goes through the bulkhead - with the arrow pointing forwards it keeps the cable away from the steering rack under the bulkhead

[StescoG66]

However there is a groove behind the steering rack that the cable sits in too...... These cars are bizarre!!