Sud Door hinges
- LooLooSud33Spider
- Posts: 1737
- Joined: Mon Dec 05, 2016 11:14 pm
- Location: Staffordshire
Sud Door hinges
Wanted.
One pair of RH Door hinges. Tbh I’m not sure they’re handed. I need the part that bolts to the car (Both Upper and lower hinge) I don’t need the other half. That’s welded to the door At the factory and isn’t removable. Lou
One pair of RH Door hinges. Tbh I’m not sure they’re handed. I need the part that bolts to the car (Both Upper and lower hinge) I don’t need the other half. That’s welded to the door At the factory and isn’t removable. Lou
Alfasud Ti 1984
Alfa Spider 2.0 Ts 916
Alfa Spider 20v Turbo
Alfa Spider 2.0 Ts 916
Alfa Spider 20v Turbo
Re: Sud Door hinges
Ahhh!
Scrap man took a pair of doors this last week.... Could have chopped them off if I'd known
Scrap man took a pair of doors this last week.... Could have chopped them off if I'd known
Giulietta JTD 170
Lancia Delta integrale
Lancia Flavia coupe 1.8 1963
Lancia Dedra turbo
Renault Clio 197 RS
I'm bad with people things
But I should have tried more
Lancia Delta integrale
Lancia Flavia coupe 1.8 1963
Lancia Dedra turbo
Renault Clio 197 RS
I'm bad with people things
But I should have tried more
- LooLooSud33Spider
- Posts: 1737
- Joined: Mon Dec 05, 2016 11:14 pm
- Location: Staffordshire
Re: Sud Door hinges
Holy scrap man Kev that’s a bugger.
Alfasud Ti 1984
Alfa Spider 2.0 Ts 916
Alfa Spider 20v Turbo
Alfa Spider 2.0 Ts 916
Alfa Spider 20v Turbo
Re: Sud Door hinges
Sorted for you Lou, - pm sent.
Cheers, John.
Cheers, John.
Re: Sud Door hinges
I will be interested to see how you resolve the droopy door issue Lou. As I have the same problem.
1976 1.5Ti
1977 1.2Ti
1989 1.7 Sprint Veloce
1989 75TS
2003 147 2.0TS Lusso
2004 MX5 1.8S
2002 1.6 Focus LX
1977 1.2Ti
1989 1.7 Sprint Veloce
1989 75TS
2003 147 2.0TS Lusso
2004 MX5 1.8S
2002 1.6 Focus LX
- LooLooSud33Spider
- Posts: 1737
- Joined: Mon Dec 05, 2016 11:14 pm
- Location: Staffordshire
Re: Sud Door hinges
Hi Crank
Make sure your door hinges are in Good shape that’s the usual suspect
They’re nothing special just a BFO roll pin
I’m thinking of having a machine shop turn some bespoke bolts up to do the job as I hate bashing things with hammers to install stuff. That said it’s usually effective .
Make sure your door hinges are in Good shape that’s the usual suspect
They’re nothing special just a BFO roll pin
I’m thinking of having a machine shop turn some bespoke bolts up to do the job as I hate bashing things with hammers to install stuff. That said it’s usually effective .
Alfasud Ti 1984
Alfa Spider 2.0 Ts 916
Alfa Spider 20v Turbo
Alfa Spider 2.0 Ts 916
Alfa Spider 20v Turbo
Re: Sud Door hinges
Never thought of just hammering in a roll pin. Thanks for the tip.
1976 1.5Ti
1977 1.2Ti
1989 1.7 Sprint Veloce
1989 75TS
2003 147 2.0TS Lusso
2004 MX5 1.8S
2002 1.6 Focus LX
1977 1.2Ti
1989 1.7 Sprint Veloce
1989 75TS
2003 147 2.0TS Lusso
2004 MX5 1.8S
2002 1.6 Focus LX
Re: Sud Door hinges
Hi Lou in the end I ended up making a shim for my bottom hinge out of perspex (no rust) an old credit card makes a great template and easy to cut.LooLooSud33Spider wrote: ↑Fri Sep 11, 2020 1:08 pmHi Crank
Make sure your door hinges are in Good shape that’s the usual suspect
They’re nothing special just a BFO roll pin
I’m thinking of having a machine shop turn some bespoke bolts up to do the job as I hate bashing things with hammers to install stuff. That said it’s usually effective .
Re: Sud Door hinges
I used M8x 80 cap screws with the excess thread cut off, and a nyloc nut/washer
The 50mm plain shank length suits the hinge.
The 50mm plain shank length suits the hinge.
- LooLooSud33Spider
- Posts: 1737
- Joined: Mon Dec 05, 2016 11:14 pm
- Location: Staffordshire
Re: Sud Door hinges
Thanks Dave I’ll look at that as a mod I’m reluctant to use the std roll pins as they’re such a PITA to get in and out . A simple high quality Precision bolt With a nylon nut would be much better
Alfasud Ti 1984
Alfa Spider 2.0 Ts 916
Alfa Spider 20v Turbo
Alfa Spider 2.0 Ts 916
Alfa Spider 20v Turbo