Hi all
Anyone got a good crank with 67.2mms stroke which were in the 1350 and 1490 c.c. Engines?
Ideally one that is on std sizes for mains and bigends, but 1st undersize a possibility as long asnot in need of a grind.
Crank in the 33 needs to go 2nd undersize which whilst fine for a road car might be a concern for a competition car.
Would consider a complete engine as long as crank is good
Rsfruitbat
1350 / 1490 crank
- LooLooSud33Spider
- Posts: 1756
- Joined: Mon Dec 05, 2016 11:14 pm
- Location: Staffordshire
Re: 1350 / 1490 crank
Hi Ade . Can’t promise but I may have one . Are you in a rush ?
Lou.
Lou.
Alfasud Ti 1984
Alfa Spider 2.0 Ts 916
Alfa Spider 20v Turbo
Alfa Spider 2.0 Ts 916
Alfa Spider 20v Turbo
-
- Posts: 774
- Joined: Tue Jan 28, 2014 7:54 am
Re: 1350 / 1490 crank
Hi Lou
If you have one then that's all I need As a starting point. Doubt much if anything will get done over xmas. What does your timescale look like Lou?
Really appreciate your help whether you have or haven't got one.
Many thanks rsfruitbat
If you have one then that's all I need As a starting point. Doubt much if anything will get done over xmas. What does your timescale look like Lou?
Really appreciate your help whether you have or haven't got one.
Many thanks rsfruitbat
- LooLooSud33Spider
- Posts: 1756
- Joined: Mon Dec 05, 2016 11:14 pm
- Location: Staffordshire
Re: 1350 / 1490 crank
Hi ade. Whereabouts are you ? I have a complete 1.5 short motor (code 30588. - B 84 x S 67.2.
Btw. Have you got any old 8v heads or cams etc I’d be happy to consider a trade if your interested .
Btw. Have you got any old 8v heads or cams etc I’d be happy to consider a trade if your interested .
Alfasud Ti 1984
Alfa Spider 2.0 Ts 916
Alfa Spider 20v Turbo
Alfa Spider 2.0 Ts 916
Alfa Spider 20v Turbo
-
- Posts: 774
- Joined: Tue Jan 28, 2014 7:54 am
Re: 1350 / 1490 crank
Hi Lou
I'm in Kidderminster in words
Are you after std heads of competition?
I only need the crank really but will tAke the lot if that is what you would prefer.
Do you know what sizes there mains and big ends are on?
If I haven't got anything you would like how much are you after?
Would it be of any interest to you if I got my crank rebound to keep you with a spare short engine?
I,'ll pm you my contact details
Let me know
Rsfruitbat
I'm in Kidderminster in words
Are you after std heads of competition?
I only need the crank really but will tAke the lot if that is what you would prefer.
Do you know what sizes there mains and big ends are on?
If I haven't got anything you would like how much are you after?
Would it be of any interest to you if I got my crank rebound to keep you with a spare short engine?
I,'ll pm you my contact details
Let me know
Rsfruitbat
Re: 1350 / 1490 crank
I've a 1500 cross drilled crank, on std mains and -10 big ends if thats of any interest, and a few standard 1500 cranks Ade, - pm, or give me a ring if of any interest.
Cheers, John.
Cheers, John.