Speedline Alloys for sale

Post Reply
User avatar
PETROLHEAD
Posts: 3045
Joined: Thu Sep 26, 2013 7:51 pm
Location: Nottingham

Speedline Alloys for sale

Post by PETROLHEAD »

Here we have a set of 4 x 16" x 7j genuine Speedlines, from a 155 Sportpack.

Lovingly refurbished for the current owner, Matt, in solid Graphite Grey Powder Coat.

These have not seen a tyre or ther road since being done, so are like brand new.

If you prefer a little bit of contrast or bling, i can polish the outer rim edge for a small fee, which looks a treat on these!


Clearly these are 4 x 98 pcd stud pattern, and should fit pretty much most 4 stud Alfa, Fiat Lancia cars.

IMG_0548.JPG
IMG_0550.JPG
IMG_0549.JPG
IMG_2408.JPG



£250 ovno
SHREW

I AM the Law!


Alfasud 1.7-16v, Charade Turbo SR, & The Dirty Diesels - GT Cloverleaf, 159 Ti Sportwagon, Saab 9-3 Sportwagon

88liam
Posts: 163
Joined: Mon Jan 27, 2014 8:34 pm
Location: Lancs

Re: Speedline Alloys for sale

Post by 88liam »

Hi Shrew,

Do you have any pictures of the speedlines fitted to a sud?

Liam

alfachris
Posts: 489
Joined: Mon Jun 16, 2014 5:12 pm
Location: Hinckley, Leicestershire

Re: Speedline Alloys for sale

Post by alfachris »

Greencloverleaf Pat fitted one on his sud cant remember if he put pic on there or alfaowner I find it later

alfachris
Posts: 489
Joined: Mon Jun 16, 2014 5:12 pm
Location: Hinckley, Leicestershire

Re: Speedline Alloys for sale

Post by alfachris »

Found it on alfaowner
Attachments
382327_10151478066309761_577887847_n.jpg

User avatar
PETROLHEAD
Posts: 3045
Joined: Thu Sep 26, 2013 7:51 pm
Location: Nottingham

Re: Speedline Alloys for sale

Post by PETROLHEAD »

if you want me to try them on a sud Liam, i have another set waiting for refurb, which i can throw on the sud for you and photograph.

it'll give a good idea how they fit and look and i can measure any area's of concern for you too.

just holla mate :D
SHREW

I AM the Law!


Alfasud 1.7-16v, Charade Turbo SR, & The Dirty Diesels - GT Cloverleaf, 159 Ti Sportwagon, Saab 9-3 Sportwagon

88liam
Posts: 163
Joined: Mon Jan 27, 2014 8:34 pm
Location: Lancs

Re: Speedline Alloys for sale

Post by 88liam »

Hi Shrew,

If you would not mind, looking at options for SUD16X.


Liam

User avatar
PETROLHEAD
Posts: 3045
Joined: Thu Sep 26, 2013 7:51 pm
Location: Nottingham

Re: Speedline Alloys for sale

Post by PETROLHEAD »

Evening Liam

i didn't get the chance to sort those wheels out for you today, but for good reason, as i was finishing off another set of wheels in 15x7 so you can see a few options side by side maybe,.

tomorrow mate i promise, rain or shine! :D
SHREW

I AM the Law!


Alfasud 1.7-16v, Charade Turbo SR, & The Dirty Diesels - GT Cloverleaf, 159 Ti Sportwagon, Saab 9-3 Sportwagon

User avatar
PETROLHEAD
Posts: 3045
Joined: Thu Sep 26, 2013 7:51 pm
Location: Nottingham

Re: Speedline Alloys for sale

Post by PETROLHEAD »

Right , here we go liam.

i fitted tyres to these two wheels for you, and chose one of the speedlines in particular in that it already has a polished lip, which not only looks good, it helps "shrink" the look of the wheel.

i also chose the tyres for a reason too, because the 195 45 16 has an almost identical (1% difference) total diameter and therefore rolling radius as a 195 50 15 typically fitted, and as to the Revolution RFX wheel.


So, here we go, a few pictures for you to see what you think, and to recap, the speedlines are original 155 sportpack, so 16" x 7j et 40 i think, and the Revolution RFX is a 15" x 7j and an offset more likely around 30/35 is suspect.


DSC_4040[1].JPG
DSC_4041[1].JPG
DSC_4042[1].JPG
SHREW

I AM the Law!


Alfasud 1.7-16v, Charade Turbo SR, & The Dirty Diesels - GT Cloverleaf, 159 Ti Sportwagon, Saab 9-3 Sportwagon

User avatar
PETROLHEAD
Posts: 3045
Joined: Thu Sep 26, 2013 7:51 pm
Location: Nottingham

Re: Speedline Alloys for sale

Post by PETROLHEAD »

and just to show how close they are
DSC_4037[1].JPG
DSC_4038[1].JPG
DSC_4039[1].JPG



there you go mate, enjoy some pondering :D
SHREW

I AM the Law!


Alfasud 1.7-16v, Charade Turbo SR, & The Dirty Diesels - GT Cloverleaf, 159 Ti Sportwagon, Saab 9-3 Sportwagon

88liam
Posts: 163
Joined: Mon Jan 27, 2014 8:34 pm
Location: Lancs

Re: Speedline Alloys for sale

Post by 88liam »

Hi Shrew,

Thanks a lot , manic at my end, sorry not been in touch, will give you
a call over the weekend, the RFX are floating my boat?

Liam

User avatar
PETROLHEAD
Posts: 3045
Joined: Thu Sep 26, 2013 7:51 pm
Location: Nottingham

Re: Speedline Alloys for sale

Post by PETROLHEAD »

I suspect that RFX's float just about everyones boat! :mrgreen:


damn handsome wheel, and perfect for suds in my opinion.

i look forward to a catch up liam, speak tomorrow mate :D
SHREW

I AM the Law!


Alfasud 1.7-16v, Charade Turbo SR, & The Dirty Diesels - GT Cloverleaf, 159 Ti Sportwagon, Saab 9-3 Sportwagon

alfachris
Posts: 489
Joined: Mon Jun 16, 2014 5:12 pm
Location: Hinckley, Leicestershire

Re: Speedline Alloys for sale

Post by alfachris »

I like the look of both.............was going to sell my spare set of speedlines but I'm going to refurb them and fit on the black green cloverleaf........my rfx's are for the black/White now

Sud 145
Posts: 1511
Joined: Mon Jan 27, 2014 11:08 pm
Location: West Sussex.

Re: Speedline Alloys for sale

Post by Sud 145 »

Shrew is it just me or do the wheels appear slightly forward in the shell or is it an optical illusion?

User avatar
PETROLHEAD
Posts: 3045
Joined: Thu Sep 26, 2013 7:51 pm
Location: Nottingham

Re: Speedline Alloys for sale

Post by PETROLHEAD »

They could be mate, and if so, it'll likely be the use of a mixture of 33 suspension, arms etc, back and front, that are putting the positioning off.

The rear end is going back to all sud, the front i'll gauge as i go :D
SHREW

I AM the Law!


Alfasud 1.7-16v, Charade Turbo SR, & The Dirty Diesels - GT Cloverleaf, 159 Ti Sportwagon, Saab 9-3 Sportwagon

Post Reply