1500cc boxer flat heads, ex racer.

Post Reply
Veesix75
Posts: 1699
Joined: Mon Jan 27, 2014 8:37 pm

1500cc boxer flat heads, ex racer.

Post by Veesix75 »

I have some quite old (as in when built, not condition) flat heads, ported, with reprofiled twin lobe cams. The lift was measured at 10.9 so I think a higher rev motor and the cams might not be suitable for road use.

They are clean as a whistle, must have been refurbed and not used, complete with valves, cams, adjusters etc. Ready to fit.

I’ll need to measure the valves (in the loft again!) and can take pics, but if fitted with some milder cams would be a nice power gain for someone running an older flat head motor.

I’ll say £400 Ono, but feel free to make an offer as I really don’t know value, and as above the cams look race profiles. However a lot of work has gone into the rebuild, valves etc already. Sadly I have no history on them in terms of spec / power etc.

Prefer collection as they are heavy 😀

Post Reply