2000 cc engine

An area for Alfa Racers to share their experiences and plans, along with technical specs and details (if willing!) of their beloved cars.
Post Reply
User avatar
902a
Posts: 85
Joined: Wed Feb 05, 2014 12:35 pm
Location: Germany

2000 cc engine

Post by 902a »

Some years ago I bought this 8V heads from Bryan Shrubb.
I took me some years to bring all the parts together I needed for a new 2000 cc engine.
It has a steel crank with 80,3 mm stroke, steel conrods, forged pistons for 89,0 mm bore, large capacity oil sump with mouse traps and a custom made airbox
Airbox2.jpg
A new custom made ehaust manifold was finished last week..
St7.jpg
Now it´s time to get the car running..

Ali

User avatar
BS25
Posts: 290
Joined: Mon Feb 03, 2014 11:57 pm
Location: Cheshire
Contact:

Re: 2000 cc engine

Post by BS25 »

Looks good Ali, glad it's all come together for you :-)

adsblacksud
Posts: 138
Joined: Thu Jan 30, 2014 11:49 pm
Location: Wiltshire

Re: 2000 cc engine

Post by adsblacksud »

Hello Ali

Do you have any photographs of your complete exhaust routing?
I seem to remember that your exhaust (used to) run directly rearwards without going up and over the axle, however I am easily confused.

Thanks

Adam

User avatar
902a
Posts: 85
Joined: Wed Feb 05, 2014 12:35 pm
Location: Germany

Re: 2000 cc engine

Post by 902a »

Using the 33 905 rear axle there is enough room underneath..
St1.jpg
St94.jpg
Ali

adsblacksud
Posts: 138
Joined: Thu Jan 30, 2014 11:49 pm
Location: Wiltshire

Re: 2000 cc engine

Post by adsblacksud »

That’s great Ali, thank you very much.

Adam

Kegsti66
Posts: 2850
Joined: Fri Sep 26, 2014 7:20 pm
Location: Northamptonshire

Re: 2000 cc engine

Post by Kegsti66 »

That is some lovely engineering .
Thanks for posting up. Car looks beautifully prepared. 8-)

Post Reply