916 TS spider

Post Reply
User avatar
LooLooSud33Spider
Posts: 1733
Joined: Mon Dec 05, 2016 11:14 pm
Location: Staffordshire

916 TS spider

Post by LooLooSud33Spider »

Hi guys. Heres the other car I'm currently building for the track. Almost finished on the suspension and brakes .cage next recommendations welcome . Sadly Mods are very limited in the TS cup . Question is it possible to remover at least permanently bypass the code key system (yellow box) ?.
IMG_2263.jpg
Alfasud Ti 1984
Alfa Spider 2.0 Ts 916
Alfa Spider 20v Turbo

User avatar
KevJTD
Posts: 5107
Joined: Thu Sep 26, 2013 8:48 pm
Location: Lincs

Re: 916 TS spider

Post by KevJTD »

when I did the 145 with the fiat coupe engine I used a combination of fiat & alfa wiring, a right headache! then I heard there is a guy who can delete the yellow box altogether if you send him the ecu & relevant keys/box....so yes, it can be done :)
Giulietta JTD 170
Lancia Delta integrale
Lancia Flavia coupe 1.8 1963
Lancia Dedra turbo
Renault Clio 197 RS

I'm bad with people things
But I should have tried more

User avatar
LooLooSud33Spider
Posts: 1733
Joined: Mon Dec 05, 2016 11:14 pm
Location: Staffordshire

Re: 916 TS spider

Post by LooLooSud33Spider »

Hi Kev thanks for that. Don't suppose you can remember who it was and better still some contact info for the chap .
Alfasud Ti 1984
Alfa Spider 2.0 Ts 916
Alfa Spider 20v Turbo

User avatar
KevJTD
Posts: 5107
Joined: Thu Sep 26, 2013 8:48 pm
Location: Lincs

Re: 916 TS spider

Post by KevJTD »

can't recall now but i'll have a think, in the meantime there are a few companies seeming to do the immobiliser delete......

http://ecutechnologies.co.uk/
Giulietta JTD 170
Lancia Delta integrale
Lancia Flavia coupe 1.8 1963
Lancia Dedra turbo
Renault Clio 197 RS

I'm bad with people things
But I should have tried more

User avatar
KevJTD
Posts: 5107
Joined: Thu Sep 26, 2013 8:48 pm
Location: Lincs

Re: 916 TS spider

Post by KevJTD »

Giulietta JTD 170
Lancia Delta integrale
Lancia Flavia coupe 1.8 1963
Lancia Dedra turbo
Renault Clio 197 RS

I'm bad with people things
But I should have tried more

User avatar
PETROLHEAD
Posts: 3045
Joined: Thu Sep 26, 2013 7:51 pm
Location: Nottingham

Re: 916 TS spider

Post by PETROLHEAD »

This guy seems to have the right idea!



Thor.jpg


:D :D :D
SHREW

I AM the Law!


Alfasud 1.7-16v, Charade Turbo SR, & The Dirty Diesels - GT Cloverleaf, 159 Ti Sportwagon, Saab 9-3 Sportwagon

User avatar
LooLooSud33Spider
Posts: 1733
Joined: Mon Dec 05, 2016 11:14 pm
Location: Staffordshire

Re: 916 TS spider

Post by LooLooSud33Spider »

Who is he ????
Alfasud Ti 1984
Alfa Spider 2.0 Ts 916
Alfa Spider 20v Turbo

User avatar
LooLooSud33Spider
Posts: 1733
Joined: Mon Dec 05, 2016 11:14 pm
Location: Staffordshire

Re: 916 TS spider

Post by LooLooSud33Spider »

Cage finally in just got to paint it and plumb extinguisher, bolt seat in and fit new harness. May even get to race the sodding thing this year.
Attachments
image2 (2).jpg
Alfasud Ti 1984
Alfa Spider 2.0 Ts 916
Alfa Spider 20v Turbo

User avatar
PETROLHEAD
Posts: 3045
Joined: Thu Sep 26, 2013 7:51 pm
Location: Nottingham

Re: 916 TS spider

Post by PETROLHEAD »

Looking good lou,

One thing i cant see though is your harness bar?

I thought being a new cage install that would have specced into it already?

I know from walking round the paddock this year that many folk have been sluggish to react to the new legislation, and some of those that have appear to have interpretted the angles of install recommended in the rules rather, errr, differently!
SHREW

I AM the Law!


Alfasud 1.7-16v, Charade Turbo SR, & The Dirty Diesels - GT Cloverleaf, 159 Ti Sportwagon, Saab 9-3 Sportwagon

User avatar
LooLooSud33Spider
Posts: 1733
Joined: Mon Dec 05, 2016 11:14 pm
Location: Staffordshire

Re: 916 TS spider

Post by LooLooSud33Spider »

Hi Shrew yes ithas a Hans bar thsi shot show uf better . It has to be down low as the seat is lower than stock.
Attachments
image6.jpg
Alfasud Ti 1984
Alfa Spider 2.0 Ts 916
Alfa Spider 20v Turbo

User avatar
LooLooSud33Spider
Posts: 1733
Joined: Mon Dec 05, 2016 11:14 pm
Location: Staffordshire

Re: 916 TS spider

Post by LooLooSud33Spider »

]Finally got the spider finished and track ready . Went to Snetterton a couple of weeks ago . Initial impressions are good its got decent pace. I had a problem with it constantly jumping out of gear as a result i had to race the whole weekend steering one handed and holding it in gear with my left hand. As such we treated the event as a test session .
Considering I'd never even driven the car in the road and had no idea if it had any problems im happy with the way it went. Anyway I've got the gearbox out now to replace the clutch and Found the problem . The linkage pivot thats mounted on the Rack had seized solid and the rubber bush was acting like a spring and pulling the lever out of gear. Thankfully it was A simple fix .
Spider2.jpg
Spider3.jpg
35856873891_1b9d821b8e_z.jpg
Alfasud Ti 1984
Alfa Spider 2.0 Ts 916
Alfa Spider 20v Turbo

Kegsti66
Posts: 2849
Joined: Fri Sep 26, 2014 7:20 pm
Location: Northamptonshire

Re: 916 TS spider

Post by Kegsti66 »

Sounds like a successful first outing .
Nice to hear you sorted the gear problem easily.

User avatar
LooLooSud33Spider
Posts: 1733
Joined: Mon Dec 05, 2016 11:14 pm
Location: Staffordshire

Re: 916 TS spider

Post by LooLooSud33Spider »

New engine coming together nicely . Although This ones actually for Nick Anderson’s yellow Spider . I’ve got another one to do for mine.
05C90843-916A-48E5-A134-71273C4FC184.jpeg
73C9FC65-2CEE-4A8F-8C71-DC1C79101D21.jpeg
Alfasud Ti 1984
Alfa Spider 2.0 Ts 916
Alfa Spider 20v Turbo

Post Reply