33 16v

LooLooSud33Spider · Post by **LooLooSud33Spider** » Sat Oct 21, 2017 9:55 pm

I've decided I'm not breaking it (never really an option TBH) But I'm taking the blower off and that may end up on the road Sud . I've acquired a set of John Sismeys cams and I've a pair of unfinished bigger valve heads that I started work on 2 yrs ago so I'm going to start to progress that and rebuild the 16v engine to take those new heads .
Refit the 45 Jenvey throttle bodies and remap as appropriate .
Thanks for all the input guys I just need a bit of encouragement and motivation to get the car back out on track. It deserves that.

junior · Post by **junior** » Sun Oct 22, 2017 9:07 am

Putting the blower on the road Sud sounds great. May even encourage John to get his finished!

Especially as you know how to set it up well, you should end up with a rather fabulous car.

Would you go for a 1.7 or 1.5 engine with it ?

LooLooSud33Spider · Post by **LooLooSud33Spider** » Sun Oct 22, 2017 10:18 am

I'd use a 1500 veloce engine as the base

Post by **KevJTD** » Sun Oct 22, 2017 8:39 pm

You keep on building it, we'll keep drooling at it and giving the required encouragement

LooLooSud33Spider · Post by **LooLooSud33Spider** » Tue Oct 31, 2017 10:42 am

Thanks for all the words of encouragement. Feeling a bit more positive now

LooLooSud33Spider · Post by **LooLooSud33Spider** » Sun Nov 26, 2017 9:51 am

Uploaded a short video to FB (was too big for CAF) of the 33 running up to temperature

https://m.facebook.com/louise.west.311/ ... 5923135647

Johnboy · Post by **Johnboy** » Sun Nov 26, 2017 10:15 am

Morning
The link doesn't work?

LooLooSud33Spider · Post by **LooLooSud33Spider** » Sun Nov 26, 2017 10:57 am

It just worked for me John. But If It doesn't then just search FB for my profile .

Johnboy · Post by **Johnboy** » Sun Nov 26, 2017 11:12 am

Just friend requested you. As I think you need to be friends to see it. Unless you make it public

LooLooSud33Spider · Post by **LooLooSud33Spider** » Tue Jun 12, 2018 4:32 pm

Superchargers OFF !! Jenveys refitted. I can now use it whilst I finish the new BV heads.
Complete with new throttle linkage I made from scratch. I ran it very briefly as it’s still on the blower Map. We’ll be uploading the old N/A map next week

LooLooSud33Spider · Post by **LooLooSud33Spider** » Sat Jan 15, 2022 5:31 pm

Ok quick update on the 33. After deciding that I’m never going to race the 33 again I had taken the decision to break the car. However as usual things change and the plan now is to sell the car. However. Before I sell it I’m going to go through it and recommission the car so that it can be sold as a track day car. The engine will be swapped for something less highly strung and probably refit a pair of carbs and distributor. This will Keep it Nice and simple for a newbie to track days.

Lou

alfadave · Post by **alfadave** » Wed Jan 19, 2022 10:35 am

It could possibly be argued that you need to reduce your collection of toys!

Could the 33 become a road car? Might be easier to sell that way?

LooLooSud33Spider · Post by **LooLooSud33Spider** » Wed Jan 19, 2022 11:44 am

It could make a road car but would need a lot of work

LooLooSud33Spider · Post by **LooLooSud33Spider** » Sun Jan 22, 2023 10:18 pm

Sadly this car has now been broken for parts

alfadave · Post by **alfadave** » Tue Jan 24, 2023 4:00 pm

Whats happening to the shell?

LooLooSud33Spider · Post by **LooLooSud33Spider** » Tue Jan 24, 2023 4:24 pm

Hi Dave. By the time I’ve finished it will be a totally bare shell all the lightweight exterior panels inc doors have already gone. it’s actually relatively rust free but it has obviously been extensively modified for race use. That said if it’s any use to anyone they are more than welcome to it in exchange a few bottle of quality Red wine. I will post a picture when I’ve finished stripping it and I’ll give it week then it’s off to the yard of DOOM !

alfadave · Post by **alfadave** » Tue Jan 24, 2023 6:10 pm

Shame to scrap a solid shell!

What panels would be required?

Surely someone (not me!) would take it on.

Maybe facebook/ebay might find someone.

LooLooSud33Spider · Post by **LooLooSud33Spider** » Tue Jan 24, 2023 6:19 pm

It would need rear arch repair panels , all four doors, bonnet, tailgate and wings. I may have a good std front panel and possibly front wings that could be included if enough wine was offered. Tbh it would be ideal for some who’s got a rusted out 33 and has all the bits. It even has a V5 in my name it’s an M reg and apparently one of the last 33 sold by Alfa GB.

alfadave · Post by **alfadave** » Fri Feb 03, 2023 9:21 am

Lou,
what happened to your 33 shell??

Hope you didn't scrap it!

LooLooSud33Spider · Post by **LooLooSud33Spider** » Fri Feb 03, 2023 9:36 am

No it’s still here Dave. I haven’t finished stripping it yet. But once it is stripped it won’t be here long.

alfadave · Post by **alfadave** » Fri Feb 03, 2023 9:51 am

Try it on alfa BB perhaps

LooLooSud33Spider · Post by **LooLooSud33Spider** » Fri Feb 03, 2023 9:53 am

What’s Alfa BB

alfadave · Post by **alfadave** » Fri Feb 03, 2023 10:20 am

a well known Alfa Forum!

LooLooSud33Spider · Post by **LooLooSud33Spider** » Fri Feb 03, 2023 11:06 am

I thought CAF was the only forum that mattered

Post by **KevJTD** » Fri Feb 03, 2023 9:08 pm

LooLooSud33Spider wrote: ↑Fri Feb 03, 2023 11:06 am I thought CAF was the only forum that mattered

Classic Alfa Forums

Classic Alfa Forums

33 16v

Re: 33 16v

Re: 33 16v

Re: 33 16v

Re: 33 16v

Re: 33 16v

Re: 33 16v

Re: 33 16v

Re: 33 16v

Re: 33 16v

Re: 33 16v

Re: 33 16v

Re: 33 16v

Re: 33 16v

Re: 33 16v

Re: 33 16v

Re: 33 16v

Re: 33 16v

Re: 33 16v

Re: 33 16v

Re: 33 16v

Re: 33 16v

Re: 33 16v

Re: 33 16v

Re: 33 16v

Re: 33 16v