Pair inlet manifold in good condition, 40mm inlet so from 1.7 head. Can only find one plastic spacer and will have a look for the other, but cannot guarantee it still exists.. Located central Scotland, price advertised inc postage within UK but open to reasonable offers as no real benchmark as to th...

Now a thread resurrection.

The block I have is a 30736 which is 1.7 8v ie - is this the same as the 1.7 carb version and are 16v pistons compatible.

I have been looking for a Sipea 0444 for ages. Do you still have one?

Does anybody know what the code after the 0444 means? I have seen 6J, 6F and 7L.

Either that or a schematic of an 0444 would be a help in the quest to find an equivalent.......

Thankfully the front pulley didn’t come right off - it was in the position shown in the first picture.
I think I will check as a precaution though.

HI folks. I started project Sprint up the other day after changing the plug leads. Anyway, a few minutes later, the fan belt pulley fell off....... It gave me one hell of a fright, and thankfully the engine stopped the instant it happened (battery knackered .....) Anyway, I am wondering if the timin...

I bought that one too. Works a treat.

KevJTD wrote: ↑

Wed Apr 29, 2020 11:30 pm

30 is battery feed, so threre's gremlins somewhere.

Agreed - it should be

However the diagram given to me by a chap who’s car is fully functioning shows differently. Really strange

KevJTD wrote: ↑

Wed Apr 29, 2020 8:50 pm

https://www.ebay.co.uk/itm/DURITE-0-727 ... Swd~RZUmpM

This relay is a perfect fit for the equally difficult to find high beam relay. You guys helped me with that one too

Thanks gents. Just to add to the mix, the picture of the fuse box is from my car, where pin 87 should be is actually blank, so the pin 87b is the only one with a connection. The little diagram was from a gent on the AROC Alfasud section who checked his car for me. With ignition on both pins 86 and 8...

Pics added to try to clarify a bit :-) IMG_20190217_181613221.jpg facebook_1588060124057_6660806930573790499.jpg facebook_1588059956802_6660806229058624101.jpg received_2645929465681115.jpeg received_1392602634281896.jpeg received_278313513181666.jpeg facebook_1588059928789_6660806111561922429.jpg f...

I got some on eBay for a coup,e of quid, black substantial plastic. They were originally for a caravan

Trying to find an equivalent to the relay mentioned in the title. I gather that with Sipea 0440 is normally open, 0444 means normally closed but I don’t know what the difference between version 6J and 6F. This is for the mystery relay I have been trying to find out about for ages - the one to the ri...

mine is 180 degrees out and tbh just left it. I gather the distributor is driven of the oil pump so if mounted 180 degrees out then thats why. It starts and runs so I would leaveit be

Should do. The red carpet in my Sprint I think came out a 'Sud

KevJTD wrote:Proper 2+2 now, how is it for room? Sometimes the front seat upgrades make the car look smaller, must say though the Alfa script makes a nice touch

Thanks Kev. I am quite pleased with it. Seats were an easy mod - they were taken from a Phase 1 GTV which was going to the scrapper.

Interior now pretty much complete and finalised, bar neededing to retension the headlining and nearside sill needs trims - but can't fit them until I sort the misalignment on the wing. Small stuff though all said ....... Quite pleased with how this looks if I may say so myself.......

been a wee while -Thought I would post a wee update. Decided to avoid rolling around on cold concrete floors for the next while and concentrate on trim etc. Trimming the non standard rear seats to an acceptable standard being the trickiest job in my opinion. Anyway -couple of pics attached. The cent...

I don’t think so as the beam pattern is flat I think whereas the outer have a \_ pattern - or _/ for left hand drive..

Re the pic above. That was nearly a year ago!!!! dear me. Anyway.... that mystery relay appears to be connected to the two orange wires at the brake fluid reservoir.

Bit of a thread resurrection. Is John still on the go? Need a rear interior rear window trim in grey amongst other little bits and pieces

I was under the car the other day and took the wee plate that covers the flywheel off. Mine has a large raised O on the flywheel, then marks are T, I and II. I checked that the T aligned with cylinder 1 at the top of the stroke and it did. Didn't check at the distributor though but my dissy is on ab...

Well installed last night and quite a difference. thanks for the tip off chaps. Also - and the purists will e horrified a this - but had to devise an alternative method of putting in a crankcase breather outlet as it was missing on my car. In short, managed to drill a 10mm hole in to the oil filler ...

Alfastrut wrote:

StescoG66 wrote:Does your car have the Jaeger or Veglia Borletti instruments?

It's got jaeger instruments

Excellent. Same as mine then. will purchase one. Thanks for the tip off

Does your car have the Jaeger or Veglia Borletti instruments?

Haven't checked but I think it may be these......

https://www.ebay.co.uk/itm/FIAT-TIPO-TI ... 3658215707

Hell of a price though........

Alfastrut wrote:Have you one with the wing in position

Wing is wrapped in bubble to protect while it is not fitted. Will do that in the next couple of nights.

Veesix75 wrote:Don’t they have captive nuts behind the holes, which have movement for adjustment ?

No its held with 3 x flange nuts behind there

Pic of a pillar faux pas.....

I think I have been a bit of a tit. I can't get my front wing to align so the door fouls it badly. The tit bit is...... On the A pillar where the wing bolts on, between the bolt holes there are recesses/indents. I have filled these in........ Would I be correct in saying that the wing sits in these ...

I am in the same boat as you doing an 88 1.7QV. Feel free to drop me a line will help if I can