Search found 77 matches
- Sun Aug 23, 2020 12:40 pm
- Forum: ALFASUD, SPRINT, 33
- Topic: Quick-rack group buy?
- Replies: 5
- Views: 2406
Re: Quick-rack group buy?
Is this for a manual or a power steering rack?
- Sat May 11, 2019 1:16 pm
- Forum: ALFASUD, SPRINT, 33
- Topic: side engine mounting rubbers
- Replies: 8
- Views: 2102
Re: side engine mounting rubbers
https://alfa-restoration.co.uk/shop/pro ... cts_id=154
or if you just need the rubber bush that goes through the metal bracket on the chassis leg, the part number is 60501317 which should still be available from your friendly local main stealer
or if you just need the rubber bush that goes through the metal bracket on the chassis leg, the part number is 60501317 which should still be available from your friendly local main stealer
- Thu Apr 25, 2019 9:44 pm
- Forum: ALFASUD, SPRINT, 33
- Topic: 33 P4 Brake Compensator Valve
- Replies: 2
- Views: 1313
- Sat Apr 06, 2019 2:04 pm
- Forum: ALFASUD, SPRINT, 33
- Topic: Quaife LSD
- Replies: 4
- Views: 2024
Re: Quaife LSD
thanks very much for the link, they are now both sold (one to me )
- Tue Jun 05, 2018 10:08 am
- Forum: ALFASUD, SPRINT, 33
- Topic: Rear brake adjustment tips.
- Replies: 4
- Views: 1986
Re: Rear brake adjustment tips.
Are you using calipers from a European ABS equipped car? Did you replace the bias valve with an ABS version or the standard version? (they are different and can affect the operation of the brakes). It sounds as though your calipers need stripping and rebuilding, my car was sitting idle for a couple ...
- Thu May 10, 2018 11:40 am
- Forum: ALFASUD, SPRINT, 33
- Topic: Reproduction seat fabrics for 33 Permanent 4 and early 16v
- Replies: 2
- Views: 1528
Re: Reproduction seat fabrics for 33 Permanent 4 and early 1
thanks Shrew, its been a bit of work but certainly worthwhile as the fabrics are really nice on the P4 Recaros. They seem to hold up better than the alcantara Recaros but many interiors are getting very tired now and unlike the alcantara which is readily available, the P4 fabric was impossible to fi...
- Thu May 10, 2018 11:33 am
- Forum: ALFASUD, SPRINT, 33
- Topic: Omp group n exhaust
- Replies: 4
- Views: 2030
Re: Omp group n exhaust
I had a Group N system on my 33 for a while, it was the centre section and the back box and although it sounded very good it was just too loud. It would wake up all my neighbours when I left for work early and on the motorway it would make your ears hurt so personally I wouldn't recommend one even i...
- Wed Apr 25, 2018 12:36 pm
- Forum: ALFASUD, SPRINT, 33
- Topic: Reproduction seat fabrics for 33 Permanent 4 and early 16v
- Replies: 2
- Views: 1528
Reproduction seat fabrics for 33 Permanent 4 and early 16v
Some of you will be aware of Antonio Ruggi who has been producing the reproduction Alfasud TI fabric and I thought you may be interested to know that I have been working with him on some reproduction fabrics for the 33 P4 Recaros and the early 33 16v seats. He has now produced a sample of the fabric...
- Sun Apr 01, 2018 2:21 pm
- Forum: ALFASUD, SPRINT, 33
- Topic: mystery fuel tank piece
- Replies: 10
- Views: 3326
Re: mystery fuel tank piece
Not the best photo but this may help:
- Thu Feb 01, 2018 7:43 pm
- Forum: PARTS WANTED
- Topic: Recaros wanted
- Replies: 9
- Views: 3617
Re: Recaros wanted
that's very kind, ideally I'm only looking for original 33 interior components but put up some photos i might be interested. If anyone does have any components from a Recaro interior I'd be very interested even if it was just the rear seats
- Thu Dec 14, 2017 10:17 pm
- Forum: PARTS WANTED
- Topic: 33 16v intake rubber sleeves
- Replies: 2
- Views: 1487
Re: 33 16v intake rubber sleeves
That would be great, thanks very much
- Thu Dec 14, 2017 10:17 pm
- Forum: PARTS WANTED
- Topic: 33 Permanent 4 4wd wiring loom
- Replies: 2
- Views: 1466
Re: 33 Permanent 4 4wd wiring loom
I've got an ECU thanks, its just the wiring i'm looking for
- Thu Dec 14, 2017 11:43 am
- Forum: PARTS WANTED
- Topic: P4 Viscous Coupler
- Replies: 11
- Views: 5159
- Wed Dec 13, 2017 7:18 pm
- Forum: PARTS WANTED
- Topic: Recaros wanted
- Replies: 9
- Views: 3617
Recaros wanted
Anybody got anything? Anything considered, P4 type or 16v alcantara type. Would prefer a complete interior but any parts would be useful.
- Wed Dec 13, 2017 7:16 pm
- Forum: PARTS WANTED
- Topic: 33 Permanent 4 4wd wiring loom
- Replies: 2
- Views: 1466
33 Permanent 4 4wd wiring loom
Long shot but does anyone have the wiring loom and relays etc for a P4 that controls all the 4wd drive system? It goes from various connections in the engine bay all the way back to the 4wd ECU in the boot.
- Wed Dec 13, 2017 7:14 pm
- Forum: PARTS WANTED
- Topic: 33 16v intake rubber sleeves
- Replies: 2
- Views: 1487
33 16v intake rubber sleeves
Anybody got these parts for a 33 16v?: Intake rubber sleeve from airbox to airflow meter. The airbox is the same for all models but the rubber sleeve is 16v specific, I think the internal diameter of the rounded end is around 68mm: 16v sleeve.png Number 4 in the diagram: emaps (14).jpg Intake rubber...
- Wed Jun 22, 2016 8:43 am
- Forum: ALFASUD, SPRINT, 33
- Topic: 33 P4 handbrake caliper piston removal?
- Replies: 5
- Views: 3242
- Tue Jun 21, 2016 12:54 pm
- Forum: ALFASUD, SPRINT, 33
- Topic: 33 P4 handbrake caliper piston removal?
- Replies: 5
- Views: 3242
Re: 33 P4 handbrake caliper piston removal?
Get yourself a brake piston winding tool, the pistons are on a threaded rod & need to wound out.
- Fri Apr 29, 2016 7:59 am
- Forum: ALFASUD, SPRINT, 33
- Topic: Brake compensator rubber bands
- Replies: 15
- Views: 7543
Re: Brake compensator rubber bands
I had the same problem on my 33, my rubber band was very perished & cracked. I looked everywhere for the correct Alfa part but had no luck so in the end I bought some rubber tent peg straps from a camping supplier which are the same length & roughly the same stiffness/resistance. They're a little th...
- Mon Jul 27, 2015 12:34 pm
- Forum: ALFASUD, SPRINT, 33
- Topic: My silicone hoses arrived for my sud
- Replies: 14
- Views: 8090
- Tue Apr 07, 2015 1:03 pm
- Forum: ALFASUD, SPRINT, 33
- Topic: My first ever 33
- Replies: 139
- Views: 51032
Re: My first ever 33
Very nice Kev, wheels look great. I see you have a missing jacking point cover, you can still find them new if you want one: Right side: http://hurtownia.euroforin.eu/cover-strip-right-side-alfa-33-9094-p-8442.html Left side: http://www.dgjauto.fr/cache-plastique-bas-de-caisse-arriere-gauche-alfa-ro...
- Mon Mar 16, 2015 12:40 pm
- Forum: ALFASUD, SPRINT, 33
- Topic: 33 brake warning light
- Replies: 6
- Views: 1803
Re: 33 brake warning light
:) you're right they're a pain in the neck, I'm not worried about all the spurious lights on the Alfa Control itself as I've hidden it behind the dash. As long as it doesn't trigger any other warning lights on the dash I'll be happy. Shrew has kindly sent me another one so I'll see if that makes a d...
- Fri Mar 13, 2015 10:00 am
- Forum: ALFASUD, SPRINT, 33
- Topic: 33 brake warning light
- Replies: 6
- Views: 1803
Re: 33 brake warning light
Thanks Chris, you were absolutely right, its the Alfa Control that's the problem. I did leave it out completely when I put my car back together but I found that a lot of the electrics, lights etc wouldn't work if the Alfa Control wasn't fitted. I disconnected everything then plugged in each connecto...
- Wed Mar 11, 2015 2:59 pm
- Forum: ALFASUD, SPRINT, 33
- Topic: 33 brake warning light
- Replies: 6
- Views: 1803
Re: 33 brake warning light
I have the ABS setup (rear discs and ABS rear bias valve) but I don't have the full ABS system, too complicated to convert for RHD. I do have the Alfa Control but I'm not sure if that has any extra sensors or connectors for the braking system over and above a car without Alfa Control. As far as I ca...
- Wed Mar 11, 2015 12:44 pm
- Forum: ALFASUD, SPRINT, 33
- Topic: 33 brake warning light
- Replies: 6
- Views: 1803
33 brake warning light
Hello all, I'm having a little problem with my car (1994 33 16v) which is a little strange and I wondered if anyone could shed any light. I have fitted uprated 4 piston calipers, larger discs and a 75 twinspark master cylinder but am finding that the brake warning light is coming on when the brake p...
- Sat Jan 31, 2015 6:04 pm
- Forum: ALFASUD, SPRINT, 33
- Topic: 33 16v starting problems
- Replies: 4
- Views: 1610
Re: 33 16v starting problems
Thanks very much for the information and suggestions, I will take another look and try a few things. It took a long time to find another fuel pump relay but I have finally found a new one now so I will fit that next week and will see what happens.
- Thu Jan 29, 2015 11:23 am
- Forum: ALFASUD, SPRINT, 33
- Topic: 33 16v starting problems
- Replies: 4
- Views: 1610
33 16v starting problems
As some of you will know I have been having a number of problems with my car. The engine was running fine but was removed to carry out some engine bay repairs and when re-installed it wouldn't run. It cranks over fine but it seems that there is no spark and no fuel. I have checked all of the electri...
- Wed Dec 17, 2014 11:16 pm
- Forum: ALFASUD, SPRINT, 33
- Topic: 33 restoration
- Replies: 51
- Views: 11592
- Wed Dec 17, 2014 12:39 pm
- Forum: ALFASUD, SPRINT, 33
- Topic: 33 restoration
- Replies: 51
- Views: 11592
- Tue Dec 16, 2014 1:55 pm
- Forum: PARTS FOR SALE
- Topic: 1.8 16v block for sale
- Replies: 21
- Views: 5230
Re: 1.8 16v block for sale
Did the block and pistons come from Dave Barbera in Wales? If so it was me who supplied the new piston, we did a deal when I bought my pistons, he was unable to order just one so I ordered 5 and he had the spare one. As previously stated, the pistons alone cost around £750 for a set so this is a pre...