Congrats on the 3rd place Adie.
I'm afraid I didn't venture out on Sunday!

Happy sledging....

Good luck at Rockingham Adie, will try to get there!

Thanks for the kind comments and warm welcome Lauren

Hello Guy's, I've managed to get into the 32's at Shelsley, with trap speeds of 92/3mph. On slicks, a 31 is possible, perhaps a little lower. No tyre warming devices allowed, only the "spin pre-start". (-But I don't do that to protect the "weak" Alfa gearbox.) -You are indeed right, no temperature i...

Thanks Guy's, what a lovely warm welcome! -Much appreciated. Yes, thanks again Bryan! -Much more stable at high speeds and most importantly cut some of the drag. (-The diffuser came first as it was "below the axle line", but then a moved into the modified class allowed the flap and slicks!) It's an ...

Thanks for the kind message, you will notice I took your kind advice as soon as the Reg's allowed re. rear end Aero....

Hello Guy's, After "lurking" on here for several years, I thought I would take this opportunity to introduce myself and practice uploading an image! Have been running this little Alfa Boxer based car for over 10 years on the UK Speed Hillclimb scene. I would also like to thank BLS and AHM for their ...

Sure, I can shoot some pictures, but not sure how to post them online.
-Drop me a PM with an email address and I will send them directly, no problem!

Best regards, Graham.

Continuing the clearout... I have a pair of steel fabricated dry sump pans for the boxer engine. -One is used, the other is new and part made (just requires the fittings added.) I would imagine they are for the 8v as there are no cam-box drains fitted, however, these could be added to the new, unfin...

Beginnings of a parts clearout I am having from running boxer engine cars for over 20 years... open to reasonable offers unless stated. 145 / 146 16v Boxer Alternators, choice of 3! 145/6 brake fluid reservoir. 145/146 Air Bag system complete with ECU. New old stock 1700cc 33 exhaust manifold £95.00...

Apologies for the delay.
-Still available.
PM sent,

Kind regards,
Graham.

Have some parts remaining from a very rare 2.0 V6 Turbo GTV.

Clutch slave cylinder.
In tank fuel pump assembly.
In tank fuel level sender.

Possibly more, I will need to check.

Open to offers.

Many thanks,
Graham.

Early Alfasud gearbox.
Possibly 1500cc.
Large diameter inboard brake drive shaft flanges.
History unknown.
Oil has been drained.

Asking £50.

Now SOLD. Thank you.

New old stock Alfa 33/ Sud Walker steel Exhaust manifold.
8v.
Some light surface rust, which should clean off easily.

Asking £100.

Email voodoo sports cars (all one word) at aol dot com.

Thanks, Graham.

Now SOLD. Thank you.

I may be able to help if not already sorted.

Kind regards, Graham.